The most versatile filling equipment is certainly pressure filling equipment. By design, pressure fillers are used for light oils and foamy products

When products foam during the fill cycle, regular gravity fillers are no longer suitable. Pressure that builds in the container need to be withdrawn back into the overflow tank. This can only be accomplished by sealing the top of the container with a soft rubber gasket. The pressure overflow filler "dives" the nozzle into the spout of your container, sealing the opening of the container and opening the nozzle for the fill cycle to begin. The fill cycle of the overflow filler is time bound, meaning, a preset time is allocated to fill. Naturally, not all nozzles fill at the same speed and therefore one bottle might be full before the other. Now, the nozzle pumps liquid at the bottom and withdraws it again from the center of the nozzle until the cycle time is completed.
This assures an even fill level across all heads of your pressure filler.

AUTOMATIC INLINE PRESSURE BOTTLE FILLER

• Handles water-thin (foaming or non-foaming) to medium viscosity fluids
• (6) Stainless Steel nozzles (expandable to 10 nozzles)
• PLC controlled with keypad input
• 50 GPM Stainless Steel centrifugal pump
• 20 gal. Stainless Steel rear supply tank
• 10 spout Stainless Steel manifold
• On casters for complete portability
• Fills 1 oz. to gallons
• Heavy duty stainless steel frame
• NEMA 4 Control Box
• Variable Speed Washdown DC Motor

Expandable up to a total of 12 nozzles